However, check the documentation for the third-party MIDI device for any information about the order in which it should be turned on relative to connected devices. The plastic ring at the base of the connector should be flush against the edge of the port.Connect the other end of the cable to the 'MIDI Out' port on the third-party MIDI device.Connect the second MIDI cable to the PSR-260's 'MIDI Out' port and connect the other end of the cable to the 'MIDI In' port on the third-party MIDI device.Turn on the PSR-260 and the third-party MIDI device. In most cases, turning the devices on in this order will work. If the device is powered by a USB cord attached to your computer, disconnect the USB cable from your computer before making any connections.Connect one end of a standard MIDI cable to the 'MIDI In' port on the back of the PSR-260. Yamaha psr-260 manual download. Make sure the connector is firmly seated in the port.
- Two references are available in addition to this manual:. The HEC-HMS user's manual (USACE, 1998b) describes how to use the HEC-HMS computer program. While the user's manual identifies the models that are included in the program, its focus is the HEC-HMS user interface.
- Start HEC-HMS by clicking on the HEC-HMS icon by going to Start Programs HEC-HMS HEC-HMS 3.1.0 (Purdue students doing this tutorial in an ITap Lab may have to first run the set-up file by going to Start Programs Course Software Engineering HEC-HMS HEC-HMS 3.1.0) After a few seconds, the following should appear.
HEC-HMS 4.1 'Error 20383 Shape is not defined for Subbasin'
HEC-HMS 4.1 'Error 20383 Shape is not defined for Subbasin'
Hec Hms 4 2
Hec Hms 4.1 User Manual
This manual is intended to aid the reader in performing many of the most. Of how the program operates. All of the features of the HEC-RAS program are covered in more detail in the program User’s Manual and the Hydraulic Reference. Located on your desktop, or go to the Start menu and click on all programs, HEC, HEC-RAS, HEC-RAS 3.1.3.
Hec Hms Manuals
How do you get the Draw Map Objects feature to work, specifically for the subbasin element?
I believe I correctly followed the 'strict naming convention' (basinname_Subbasin) indicated in the User's Manual as the Draw Map Objects option under the View menu is selectable. When I select Draw Map Objects nothing is visible in the Basin Model screen. As a side note, the shape file I am attempting to use does display as a background map.
The only reason I want to use this feature is it is required for HMR-52 modeling.
I believe I correctly followed the 'strict naming convention' (basinname_Subbasin) indicated in the User's Manual as the Draw Map Objects option under the View menu is selectable. When I select Draw Map Objects nothing is visible in the Basin Model screen. As a side note, the shape file I am attempting to use does display as a background map.
The only reason I want to use this feature is it is required for HMR-52 modeling.